The focus of these months was

• spraying color on the body

• additionally sprayed a flow-coat on the the doors, decklid, etc.

• wetsanding the body and other panels, then buffing them out

• painted and buffed the hard top inside trim pieces

• mock-up of the rear diffuser panel assembled

...and more

The focus of these months was

• buffing out the body

• mounting the electric power brake unit

• started building brake line tubing

• installed and tested rear taillights

• sanded and buffed the highly faded hard top acrylic window

• test fit the rear window rubber in the hard top

...and more

The focus of these months was

• buffing and installing rear emblem along with gas cap

• design & build front brake lines & re-polish custom master cylinder

• clean and paint the wiper rods

• re-polish the custom hood hinges

• polish the hard top latches and install SS and painted trim

• install Hushmat heat barrier / sound deadener on the inside of the firewall

• install Hushmat sound deadener / insulation on the inside of the cabin

• Raptor various small area and install side louver accent lights

• install the Vintage Air Conditioner and pull lines for the compressor

• start on the electrical wiring

• sand and polish hard top rear window

...and more

The focus of these months was

• building the add-on electrical buss panel for things like actuators & lights

• the relays for the actuators mount here - tucked in the center console

• wiring and more wiring - seems to never end

• accent lighting in the rear compartment & the jewelry box

• rear-view camera built and tested

• specialty built Phoenix billet TH700R4 arrived

• adding power to the center console and jewelry box area

• IDIDIT 7-position tilt column painted - mounts to EPAS elec pwr steering

• dash and footwell lighting installed and tested

• insulated the hard top

• added USB charging port & rear-view camera camera swith in console

...and more

The focus of these months was

• design & fabrication of brake lines for proportioning valve

• final test fit of rear bumpers before chroming

• deciding on which color upholstery goes where

• upholstering the inside of the hard top

• making grills and upholstering the main dash

• upholstery on numerous parts not needing seams

• test fit and test of cornering lamps

• grinding, sanding and getting bumpers ready for chrome

• carpteing the inside of the '67

...and more

The focus of these months was

• carpeting the inside of the '67

• what-if to decide which color upholstery goes where

• upholstered several more parts not needing seams

• finishing up brake lines w/proportioning valve

• boots for the rear decklid hinge modesty panels

• rear compartment is complete

• Ceramic Pro tinted the vent & side windows

• new tinted rear window in the  hard top

• custom polished SS accent piece under hood bumpers

• horn & other relays mounted in hidden locations

• checking seat height versus the decklid humps one more time

...and more